Garage Matters
InfluencersTechnicalYouTubers

Lewis Vehicle Services attempts first start on Mazda MX-5 turbo swap

Lewis and Dan of Lewis Vehicle Services attempt to fire up a Mazda MX-5 1.8 turbo engine swapped into a classic Jensen Healey, navigating a series of diagnostic and installation challenges.

To get the long-dormant MX-5 engine running, the team carried out a compression test, confirming readings over 100 psi. After draining stale fuel and verifying spark, a smoke check successfully identified a leak from an injector seal.

Although the turbocharged engine fired up, it ran lumpily due to heavy over-fuelling. Dropping the fuel pressure to the required 35 PSI made no difference, indicating the issue lies within the aftermarket ECU’s base map.

General workshop tasks included modifying an ill-fitting aftermarket rear suspension arm for a Kia using a Clarke Turbo 150 MIG welder. They also addressed a Volkswagen with a broken injector clamp stretch bolt snapped off inside the cylinder head.

Finally, the team traced a persistent front-end rattle to loose aftermarket brake pads, and treated a severely overheated engine with a chemical sealant after the customer drove several miles with the coolant red light on.

See also  Volkswagen prepares battery recall across MEB electric range

Related articles

Lewis Vehicle Services tackles stubborn glow plugs and tests AI MOT photos

Jack Corbett

O’Rileys Autos warns against buying duplicate diagnostic scan tools

Jack Corbett

Lewis Vehicle Services manages DVSA MOT crash and workshop backlog

Jack Corbett

Leave a Comment

✕
Garage Matters

FREE
VIEW